Materials

High Tide Reports 67.3% Fe Concentrate from Labrador West Pilot Plant

High Tide Resources says pilot plant testing at its Labrador West Iron Project produced a concentrate grading 67.3% Fe, while weight recovery averaged 23.2%.

Published:
Reading Time
3 min

High Tide Resources Corp. (CSE:HTRC) has reported pilot plant results from its Labrador West Iron Project showing a flotation concentrate with an iron grade of 67.3% Fe. Combined silica and alumina averaged 1.25%, while the company said additional metallurgical work is required before the results can support further evaluation.

#Pilot plant process and concentrate quality

The pilot plant used a gravity-cyclone circuit followed by flotation. High Tide said this work represents a move beyond laboratory-scale testing, which had included gravity-based concentration, wet magnetic separation and flotation.

The resulting concentrate contained very low levels of non-ferrous elements. High Tide identified titanium, vanadium, copper, zinc, lead, nickel, cadmium, arsenic, bismuth, antimony, silver and mercury among the elements assessed, with many results at or below detection limits.

The company said the iron grade and low combined silica and alumina are relevant to potential Direct Reduction, or DR, quality products. Michael Zurowski, High Tide’s executive vice-president, said the 1.25% result was below the company’s 2.0% target.

#Recovery result and testwork limitation

High Tide reported that the weighted average iron grade was slightly below the result indicated by earlier flotation testing. The company attributed this to the underperformance of one flotation cell, which led to higher-than-expected iron losses.

Weight recovery averaged 23.2%, compared with an anticipated range of 27% to 31%. The pilot plant results remain part of preliminary metallurgical testing, and further work is needed to assess the concentrate and any resulting pellets.

#Next phase: pelletization and reduction testing

Studiengesellschaft für Eisenerzaufbereitung GmbH & Co. KG, known as SGA, is continuing the metallurgical program at its facilities in Liebenburg, Germany. The work has advanced to pelletization, with ISO-standard testing planned for the physical and metallurgical properties of the pellets, including characteristics relevant to DR applications.

High Tide said the concentrate and pellets will subsequently be assessed through basket tests in a DRI plant and hydrogen-based reduction testing. The company also noted that, in the DR process, unwanted elements are not removed through slag formation and must instead be managed during steelmaking.

#Labrador West Iron Project

The Labrador West Iron Project is located near Labrador City and Wabush in western Labrador. High Tide said the project has road access, nearby power and proximity to rail.

The company is advancing the project through exploration, metallurgical testing, environmental baseline data collection and early-stage economic evaluation. High Tide owns a 100% interest in the project, which the company says hosts a NI 43-101 Inferred iron resource of 655 Mt @ 28.84% Fe.

#Company and project disclosures

High Tide also owns a 100% interest in the Lac Pegma copper-nickel-cobalt deposit, located 50 kilometres southeast of Fermont, Quebec. The technical information in the announcement was approved by Michael Zurowski, P.Eng., who is identified as a Qualified Person under National Instrument 43-101.

The company said its forward-looking information is subject to risks including the preliminary nature of the metallurgical results, delays in or failure to obtain required approvals, financing availability and costs, commodity price changes, project delays, and differences between estimated and actual capital or operating costs. High Tide said it provides no assurance that management’s expectations will be met.

#Key Takeaways

  • High Tide reported a pilot plant concentrate grading 67.3% Fe.
  • Combined silica and alumina averaged 1.25%, below the company’s 2.0% target.
  • Many assessed non-ferrous metal values were at or below detection limits.
  • Weight recovery averaged 23.2%, below the anticipated range of 27% to 31% after one flotation cell underperformed.
  • Further work will focus on pelletization, ISO-standard testing, DRI plant basket tests and hydrogen-based reduction testing.

Original source: Read original article

Frequently Asked Questions