Materials

Boron One Reports Study Results for Third-Party Borate Processing

Boron One Holdings reported metallurgical test results for third-party borate materials, including concentrate grades of up to 55.25% B₂O₃ and recoveries ranging from approximately 59% to 74%.

Published:
Reading Time
3 min

Boron One Holdings Inc. [TSXV:BONE] has reported results from a metallurgical study of third-party borate materials and identified calcination followed by classification as the preferred concentration process for the tested feed. The company said the findings support continued discussions with the materials supplier about a potential strategic alliance, which has not been completed.

#Preferred processing route

The study assessed alternative methods for producing commercial-grade borate concentrates from materials with different boron grades. For the tested material, the combination of calcination and classification produced the most suitable results.

Boron One said the final concentrate grade can be adjusted by changing the classification cut size. This may allow the process to target particular market requirements. The company also reported that further improvements may be possible by changing calcination and classification parameters.

#Concentrate grades and recoveries

Testing produced concentrates containing up to 55.25% B₂O₃ from high-grade feed material. Lower-grade composite feed materials produced concentrates containing 44.81% and 50.84% B₂O₃.

Reported recovery levels ranged from approximately 59% to 74%, with the outcome depending on the composition of the feed material.

Tim Daniels, Boron One’s Chief Executive Officer, said the tested feed materials ranged from approximately 20% to 42% B₂O₃ and could be upgraded to concentrates containing approximately 45% to 55% B₂O₃ while meeting commercial-grade specifications. These results relate to the company’s study and are not a statement that commercial operating performance has been established.

#Potential supplier relationship

Boron One said the results provide a basis for continuing discussions with the party that supplied the materials. The announcement refers to a potential strategic relationship and does not state that an alliance or other agreement has been finalised.

#Study contractors and technical review

Boron One commissioned the work, which was completed by Mineral & Mine Backfill Technologies. Laboratory testing was carried out by the Institute for Technology of Nuclear and Other Mineral Raw Materials.

Nenad Rakic, EurGeol, identified as a Qualified Person under National Instrument 43-101, reviewed and approved the scientific and technical information in the announcement, including the study results summary.

#Testing limitations and disclosed risks

The reported recoveries and concentrate grades are based on laboratory and pilot-scale testing and may not represent actual operating conditions.

Boron One said its forward-looking information relies on assumptions concerning geological continuity, metallurgical performance, equipment performance, regulatory approvals, financing availability, infrastructure access, and general business and economic conditions. The company also identified exploration and development risks, possible changes in Mineral Resource estimates, differences between expected and actual metallurgical performance, permitting delays, financing risks, commodity price fluctuations, operating risks, and broader economic conditions.

#Company background

Headquartered in Victoria, B.C., Canada, Boron One says it is focused on the responsible utilisation of its boron assets as part of its decarbonisation objectives. The company identifies agriculture, energy storage, fibreglass, ceramics, detergents, and advanced materials among the applications for boron. Its shares trade on the TSX Venture Exchange under the symbol “BONE”.

#Key Takeaways

  • Boron One identified calcination followed by classification as the preferred concentration method for the tested third-party borate materials.
  • Concentrate grades reached up to 55.25% B₂O₃ from high-grade feed material, while lower-grade composite feeds produced 44.81% and 50.84% B₂O₃.
  • Recovery levels ranged from approximately 59% to 74%, depending on feed composition.
  • The company said the study supports further discussions about a potential strategic alliance with the materials supplier.
  • The results came from laboratory and pilot-scale testing and may not represent actual operating conditions.

Original source: Read original article

Frequently Asked Questions